- We use high-end industrial grade materials from the best manufacturers.
- Because we are not a franchise or a representative of any one product line, we offer and install a wide variety of products and services including:
- Floor grinding and polishing
- Concrete sealing and fortification
- Acid staining /scoring
- Polyurea floor coatings
- Epoxy floor coatings
- Polyurethane floor coatings
We offer decorative chip/flake and quartz color additives to any polyurea, epoxy and polyurethane floor coating. See our Floor Coating photos See our Chip Colors About our standard epoxy floor coating system: - Our epoxy base coating is a solid high-performance epoxy coating that goes on between 5 and 10 mils thick depending on the condition of the concrete (see floor preparation below). It's a versatile two- package, chemically cured, tile-like epoxy coating with excellent chemical, corrosion, moisture, stain and abrasion resistant product.
- Our decorative vinyl color chips/flakes are available in six sizes, including: Original (random 1/4" - 1"), 1/2", 1/4", 1/8", 1/16" and 1/32". Each size provides unique appearance and texture qualities to the surface. Colors can be custom blended to your preference.
- To finish your floor, we use a high performance; two-component chemically cured aliphatic urethane topcoat that results in a long lasting finish. It is very UV stable and gives a great glossy finish to the floor.
- If you are worried about slip and fall issues, we offer a non-slip additive to the topcoat at no extra charge.
- We offer a limited 15-year warranty against any de-lamination of our floor system.
Floor preparation: - Unlike most of our competition, we prepare your floors using both chemical and mechanical processes. This system maximizes floor to product adhesion.
- First we sweep and blow out the floor and inspect for damage and issues
- We spot grind trouble areas and shape all rough curbs to an even profile
- We then apply a cleaner/degreaser solution to the floor and scrub using a 20" mechanical floor unit and rinse
- We apply chemical etching solution to profile remaining floor
- We then apply a neutralizing cleaner and scrub in using a 20" mechanical scrubber and thoroughly rinse
- Where older floors have heavy residue or a poor profile exists, complete mechanical grinding may be used to guarantee proper adhesion of the product to the concrete.
- All cracks are filled and imperfections are addressed to ensure a quality flooring finish.
- Repair all existing underpinning if damaged.
See our Floor Coating photos See our Chip Colors |